基于三坐標機直線度測量中采樣間距的研究

侯學鋒
華僑大學,福建省泉州市362021

摘　要:基于三坐標測量機對直線度測量采樣間距進行研究，根據采樣數據用最小二乘法評定直線度誤差，然后對評定結果進行分析比較，得到出用三坐標機進行直線度測量時采樣間距與尺寸大小及精度之間的關系，并提出了今后的研究方向及內容。[著者文摘]

Research of Sampling Spacing in Measuring Straightness Based on CMMHou XuefengHou XuefengAbstract:The sampling spacing in measuring straightness is researched based on three coordinate measuring machine. According to the sample data the least-square method is used to evaluate the straightness error, the evaluated resuhs are analyzed and compared, then the connections of sampling spacing in measuring straighmess with dimension and precision are gained, also the future research directions and contents are presented.[著者文摘]

Key words:CMM, straightness error, sampling spacing, dimension, precision

回復 1# 飄八零
本文在試驗基礎上得 出初步結論 ，即直線度檢測的最佳采樣間距與所評定對象的精度無關，只與其尺寸有關 ，且隨著尺寸的增大而增大。掃描密度2points/mm就可得出比較滿意的評定結果。